×

:

Not a valid Time
This is a required field.
Page
per page

Items 1-10 of 46

Set Descending Direction
  1. 1/8BSPT PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £36.73 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  2. 1/2BSPT PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £165.32 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  3. 5/8BSPT PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £302.63 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  4. 1 1/4BSPT PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £2,534.19 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  5. 1/8NPTF PRESSURE PLUGS 3/4 TAPER - UNBRAKO

    £33.02 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  6. 1/4NPTF - PRESSURE PLUGS 3/4 TAPER - UNBRAKO

    £44.49 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  7. 3/8NPTF PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £67.55 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  8. 1/2NPTF PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £161.89 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  9. 3/4NPTF PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £353.11 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
  10. 1NPTF PRESSURE PLUGS 3/4 TAPER UNBRAKO

    £1,040.53 Per 100
    Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. Dryseal plugs are ideal when the plug needs to be reused because more threads are engaged and therefore they resist leakage better. Moreover, they are also preferred in soft metals to reduce over-torquing.
Page
per page

Items 1-10 of 46

Set Descending Direction