The Moore & Wright Traditional External Micrometer has a pearl chrome plated frame with insulation pads, tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter.

The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards.

Supplied in plastic pocket case.

The 1961M Traditional External Micrometer has the following specification:

Micrometer Range: 0-25mm.
Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.
Resolution: 0.01mm.

The 1965 Traditional External Micrometer has the following specification:

Micrometer Range: 0-1in.
Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in.
Resolution: 0.001in.

The 1965M Traditional External Micrometer has the following specification:

Micrometer Range: 0-25mm.
Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.
Resolution: 0.001mm.

The 1966/2 Traditional External Micrometer has the following specification:

Micrometer Range: 1-2in.
Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in.
Resolution: 0.001in.

The 1966M/50 Traditional External Micrometer has the following specification:

Micrometer Range: 25-50mm.
Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.
Resolution: 0.01mm.

The Moore & Wright 200 Series MW200-01 Analogue External Micrometer has a hammertone finish frame with an insulated grip, a satin chrome scale and tungsten carbide measuring faces. It has a tapered design for easier access to difficult areas.

The micrometer has an adjusting key, locking lever and a constant force ratchet for ease of use. It is manufactured to DIN 863/1 standards, and supplied in plastic case.

Specification;

Range: 0-25mm.
Resolution: 0.01mm.
Accuracy: 0.004mm.

The Moore & Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting.

The micrometers are manufactured to DIN 863 standards.

Specification

Range: 0-25mm/0-1in.
Resolution: 0.001mm/.00005in.

The Moore & Wright MW279-01A Micrometer Stand is designed for micrometers up to 100mm (4in). It has a painted cast iron base with plastic covered clamping jaws and the angle of the jaws can be adjusted.

The Moore & Wright 890M Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience.

Conforms to BS 6468:1984.

Specification:

Base Length: 63.5mm (2.1/2in)
Range: 0-25mm
Resolution: 0.01mm

The Moore & Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods, with a 4mm diameter.

These adjustable depth micrometers conform to BS6468:1984.

Base Length: 63.5mm / 2.1/2in.

The Moore & Wright 891M150 Adjustable Depth Micrometer has the following specification:

Range: 0-150mm.
Resolution: 0.01mm.